Wednesday, July 13, 2011

GE MWF Water Filter

If you have a GE refrigerator, as I noted in recent years have been the GE MWF water filter prices climbing. They are already at Home Depot and Lowe bought and found that Amazon has lower prices.

The GE MWF refrigerator water filter needs to replace any special tools. Simply remove the filter by turning on the left side and remove it. They did not even turn off the water! A check valve stops the water flow for the GE MWF filter and prevents leaks.

Water Filter

Everythingyou have to do is insert the new filter and turn right. It 'so simple!

The MWF filter works with a wide range of GE and Hotpoint models and must be replaced every six months. An adapter may be needed if you have the following filter: FXRC, FXRT, MXRC, HXRT, WR97X10006, and Kenmore 46-9905.

The MWF water filter meets NSF / ANSI Standard 42 for reduction of

• 97.0% of chlorine

• 99.14% of particles of class I

The MWF RefrigeratorFilter meets NSF / ANSI Standard 53 for reduction of

• 98.54% of turbidity

• 99.6% of asbestos

• 99.3% of lead

• 98.78% of Carbofuran

•> 99.99% of cysts

• 99.78% of the dichlorobenzene 1.4

• 96.51% of Benzene

• 94.7% of Mercury

• 99.34% or alachlor

• 93.44% of Toxaphene

• 99.34% or alachlor

• 94.22% of Atrazine

• 99% of lindane

• 98.32% of 2,4-D

You can take the filter out of the box, loosen the screw in the old and new, fill two large glasses of water to "wash" and you're ready to go. No more than 5 minutes work! What could be easier.

GE MWF Water Filter

woolacombe camping

No comments:

Post a Comment